Steps 1: Go to the cluster, then navigate to 'Appliance' and add a new appliance.
Steps 2: Click the 'Add' button to begin
Steps 3:
Enter the MAC address and the last 6 letters of the serial number.
For Gateway devices, select Mode: Gateway and click Save.
For a single device, do this directly.
If you have many devices, click Download Sample File, fill it out, and then upload it in the correct format.
Important: “When adding the Access Point, select the mode as follows:
If our Gateway is part of your cluster, choose Bridge No Firewall.”
Or
“If our gateway is not in the cluster, choose Bridge + Firewall mode.”
